Switch to English

January 31st 2012

NIRQuest Spectrometer New Models


The NIRQuest512-XR covers shorter NIR wavelengths (<900 nm) – a plus for certain laser applications – and NIRQuest512-1.9 is responsive from ~1100-1900 nm while maintaining optical resolution of ~3.1 nm (FWHM).
    Main features are:
  • Multiple detector options covering various ranges from ~800-2500 nm
  • Wide range of grating and optical bench options to optimize your setup
  • External hardware triggering function for capturing data when an external event occurs; or to trigger an event after data acquisition
We also provide optical fibre, light sources and accessories that help you make the most of your NIRQuest.

January 31st 2012

Maya2000 Pro-VIS-NIR Spectrometer


The Maya2000 Pro-VIS-NIR is a back-thinned 2D FFT-CCD spectrometer with high sensitivity, 80% peak quantum efficiency and excellent VIS-NIR response.
It is ideal for low light-level applications such as Raman, as well as for analysis of gases used in semiconductor processing and measurement of biological samples in the life sciences.

The Maya2000 Pro-VIS-NIR has a low-etalon, scientific-grade detector that provides high quantum efficiency from ~400-1100 nm. Other features include triggering functions for providing accurate timing and synchronization between the spectrometer and other devices.

Three low-jitter trigger modes and normal (free-running spectral acquisition) operating modes are possible. Applications include pulsing a light source when acquiring a spectra and synchronizing spectral acquisition to coordinate with samples moving through a process stream or sensors reaching a certain temperature level.
In addition, Maya2000 Pro-VIS-NIR supports RS-232 communications and has a 30-pin connector and 10 user-programmable digital I/Os. Its enhanced onboard programmable high-speed FPGA controller enables triggering and provides other performance advantages.

October 4th 2011

Solar Laser Systems Distribution Agreement

BFi OPTiLAS is proud to announce it has entered into an exclusive distribution agreement with Solar Laser System, Spectral Product Division.
The agreement covers France, Ireland, Italy, Portugal, Spain and UK. It will reinforce Solar presence in Europe and will extend BFi OPTiLAS portfolio in spectroscopy, offering a complete range of monochromators and spectrographs as well as UV Wavelength meters.

Product range includes double-monochromators and a range of detectors and accessories.
Monochromators & Monochromators/Spectrographs Models:

  • Multi-Purpose Compact Monochromator ML44
  • Automated Monochromator/Spectrograph M266
  • Double Additive/Subtractive Monochromator MSA-130
  • Double Dispersive Automated Monochromator/Spectrograph M833
  • OEM-monochromators and spectrographs

Solar Laser Systems Spectrograph & Monochromators

July 25th 2011

Ocean Optics: Détection de taux d'Oxygène

Les sondes pour mesure de taux d'oxygène de la série NeoFox sont des spectromètres couplés à des capteurs chimiques qui permettent des mesures large spectre sur des gaz dissous ou bien de l'oxygène gazéifiée sous pression.

La sonde NeoFox est un système complet pour la mesure de durée de vie de fluorescence, de phase et d'intensité et est particulièrement adaptée pour les applications ou la sensibilité à la dérive et la stabilité du système sont des points critiques.
Optical oxygen and Ph sensors for bio-sensitive applications

April 18th 2011

Ocean Optics Spectrometers for CW NIR Lasers

BFi OPTiLAS, pan-European partner of Ocean Optics, is introducing a family of Scanning Spectrometers the SIR Scanning Spectrometer Series provides you a range of fiber-based spectral data collection.

Those are currently dedicated to CW laser characterization but other applications will soon be available.

The current wavelength ranges are: 0.9-2.6 μm (SIR-2600), 1-3.4 μm (SIR-3400), 2-5 μm (SIR-5000) and 3.0-6.5 μm (SIR-6500).

These SIR Scanning Spectrometers feature USB 2.0-compliant interfaces that provide fast data transfers. Plus, the included software can be used to control all of your SIR spectrometer's functions as well as analyze data.
Scanning Spectrometers the SIR Scanning Spectrometer

April 14th 2011

Ekspla Picosecond Tunable Solid State Lasers

BFi OPTiLAS, partner of Ekspla in France, Ireland, Italy, Nordics and UK, is proud to introduce a new generation of broadly tuneable solid state lasers.

The PG-x03 series offers unique performance with 1 kHz picosecond output tuneable from 230 nm to 16 microns with line width < 6 cm-1.

The PG-xO1 series offers high energy from 210 to 2300 nm or from 420 nm to 10 microns. The units are motorized hands-free and tuning is done via a key pad or USB port of a PC and LabViewTM driver.

Those innovative devices are ideal for non linear spectroscopy, vibrational SFG, surface SHG, CARS, Laser Induced Fluorescence (LIF), Z-scan, pump-probe experiments ….
Picosecond Solid State laser

A full range of new tuneable laser brochures can be downloaded on BFi OPTiLAS web site as well as a new THz spectrometer (up to 3.5 THz spectral range with a resolution of 5 GHz).

March 17th 2011

ELDIM: Luminancemetre Bas Niveau et Analyseur Temporel

Le système intègre un tube photomultiplicateur très sensible qui permet de mesurer des luminances d’environ 0.0001 cd/m2 avec une optique de collection de +/-1° et un filtre photopique.
L’OPTISCOPE permet de caractériser rapidement & complètement grâce à son logiciel toutes les nouvelles générations d’écrans en luminance, courbe du Gamma, temps de réponse, flicker, MPRT. Le système est livré avec une précision de +/-3% en luminance et de +/-1% en répétabilité grâce à une autocalibration réalisée en interne via une LED et une photodiode calibrée.

Le temps d’échantillonnage est typiquement de 16µs. Il offre la possibilité d’utiliser un trigger externe ou interne.

OPTISCOPE Luminancemètre faible niveau et Analyseur Temporel
La société ELDIM conçoit et fabrique des matériels de métrologie et des composants optiques spécifiques pour les secteurs de l'optique, multimédia, aéronautique, automobile et éclairage entre autres.

February 15th 2011

Ocean Optics: TORUS Mini-Spectrometers

The Torus Miniature Spectrometer is a Visible range (360-825 nm) unit that delivers low stray light and is ideal for measuring color. Its increased sensitivity and throughput also make is perfect for low light level applications. The concave grating helps to improve thermal stability of the Torus. Wavelength drift is nearly eliminated and peak shape stays the same over a wide temperature range.

As a result, Torus makes possible precision metrology, fluorescence and absorbance applications with demanding stray light and thermal stability requirements. Torus is the perfect solution for a wide range of applications where low stray light, high throughput and thermal stability are necessary:
  • Trace gas amounts in the atmosphere
  • Absorbance of optically dense solutions
  • Precision measurement of LEDs, lasers and other light sources
  • Medical dosimetry in tissue and biological media
  • Fluorescence from solid surfaces and backscattering/fluorescence in solutions and powders
TORUS Concav grating mini-spectrometer

February 7th 2011

Ocean Optics: Micro-Spectromètre STS

BFI-OPTILAS, distributeur pan-européen de la société OCEAN OPTICS introduit le nouveau micro-spectromètre OEM modèle STS.

Ce spectromètre est très compact 40x40x24mm de côté et très léger 68g et est équipé d’un détecteur CMOS (1024 pixels). Ce spectromètre ultra-compact est une solution idéale pour les intégrateurs et clients industriels qui souhaitent acheter en volume un excellent spectromètre en fournissant une analyse spectrale complète VIS (350-800nm) ou NIR (650-1100nm) avec un bon rapport signal sur bruit et un faible stray light.

Le micro-spectromètre offre une résolution optique d’environ 1.5nm (FWHM) et est particulièrement dédié aux applications de mesures de LEDs ainsi que des mesures en absorbance et transmittance.

Ce spectromètre propose en plus un shutter intégré permettant une mesure aisée du noir.
Micro spectromètre STS Ultra-compact Ocean Optics
Pour les clients industriels, le micro-spectromètre STS est proposé à un prix comparable à sa taille ! Nous proposons des prix remisés pour des commandes en volume. Alors n’hésitez pas à nous contacter

February 1st 2011

Labpshere Introduces New Software for Sunscreens’ Tests


BFi OPTiLAS’ team, Labsphere representative in France, Germany, Italy, Nordics and Spain, is proud to announce, in addition to its UV-2000S Transmittance Analyzer for Sunscreens, the availability of a new software routine allowing sunscreens to be characterized per the latest global in-vitro testing standards.

The UV-2000S Transmittance Analyzer benchtop R&D system is designed to rapidly measure the spectral transmittance of sunscreen products, especially those with very high Sun Protection Factors (SPF 50+), as well as UVA/UVB protection factor. Its application software automatically converts measurement data to provide the Sun Protective Factor (SPF), UVA to UVB ratio, critical wavelength (COLIPA 2009), Boot Star Rating, UVA I/UV ratio (FDA proposed rule) and UVA-PF (COLIPA Method).

The platform allows users to view, archive, retrieve and export data for measurements on both bare substrates and product substrates and supports evolving regional methods. The most recent software is supplied with new purchases of the UV-2000S and current users can upgrade with subscription-based updates.

January 20th 2011

EKSPLA: Tunable KHz Integrated Laser

BFi OPTiLAS, is very proud to introduce an integrated kHz tunable DPSS laser system developed by Ekspla.

The device integrates a DPSS pump laser and an OPO into a single housing and provides narrow linewidth output from 210 nm to 12 microns, with pulse duration of about 3-5 ns at a repetition rate of 100 Hz to 2.5 kHz.

The output wavelength can be set from a control pad with backlit display or from a personal computer through RS232 interface using supplied LabView drivers.

Applications include Laser-induced fluorescence , Photolysis, Photobiology, Remote sensing, Metrology, Gas spectroscopy and other laser spectroscopy applications.

BFi OPTILAS and Ekspla collaboration in France, Italy, UK and the Nordic countries.
EKSPLA Tunable KHz  laser

September 9th 2010

LABSPHERE : Systèmes de Caractérisation de DEL Labsphere

BFi OPTiLAS, Evry – partenaire européen de Labsphere est heureux de vous annoncer le nouveau système Labsphere de caractérisation de DEL.
Le modèle Labsphere TOCS de caractérisation thermique, optique et électrique permet des mesures rapides, précises et simultanées de spécifications optique et thermique de DEL.

Les fabricants, intégrateurs et utilisateurs de DEL doivent être vigilants quant aux caractéristiques thermiques et électriques des DEL à cause des variations thermiques qui peuvent affectées les performances en terme de couleur, puissance de sortie, durée de vie, efficacité lumineuse ainsi que les performances de linéarité.

Le système TOCS comprend une sphère intégrante avec lampe, un spectromètre CCD haute résolution (gamme spectrale de 360 nm à 1000nm); un support électrique et thermique et un contrôleur de température.
Ce système TOCS est disponible avec des sphères intégrantes de diamètre allant de 20 à 76 inches. Le logiciel puissant TOCS-SS est fourni avec chaque système.

Le système de caractérisation de DEL TOCS est parfaitement adapté pour les applications suivantes : DEL intégrée, Modules & réseau de Diode, rétro-éclairage, éclairage à base de semi-conducteur.

May 4th 2010

ELDIM : Analyseur Goniomètrique pour l'Eclairage

BFi OPTiLAS France distributeur exclusif de la société Française ELDIM introduit le nouveau système à angle de vue EC MASTER.
Ce nouveau système permet de mesurer en champ proche tous types de luminaires avec une excellente résolution angulaire dans un espace restreint (pas besoin d’une salle de plusieurs dizaines de mètres) à un prix plus intéressant.
Le système couplé avec la platine de positionnement XY est tout automatisé et permet de remonter aux valeurs de luminance, chrominance en champ lointain avec rapidité et précision. L’analyse en angle de vue va de +/- 60° à +/-88° suivant le type de capteurs et optiques à transformée de Fourier utilisées.
La société ELDIM conçoit et fabrique des matériels de métrologie et des composants optiques spécifiques pour les secteurs de l'optique, multimédia, aéronautique, automobile et éclairage entre autres.
0

April 13th 2010

Ocean Optics: Miniature NIR Spectrometers


NIRQuest spectrometers are ideal for applications ranging from analyzing moisture content in food and beverage products to analyzing trace metals in wastewater.


BFi OPTiLAS' team, thanks to its pan-European collaboration with Ocean Optics, is very proud to announce the latest improvements to its range of NIRQuest miniature NIR Spectrometers.

The new generation of NIRQuest delivers 20% higher throughput, improved sensitivity and up to 3x better noise performance over previous NIR spectrometers. Plus, with more options, external triggering and excellent signal-to-noise performance, NIRQuest is the smart, flexible solution to your NIR analysis needs. With higher throughput, the system is more sensitive.

For some applications, that means shorter integration times are needed to collect signal. NIRQuest provides greater sensitivity in both its 512- and 256-element versions. Higher sensitivity allows you to integrate for longer periods with less noise interference and provides better signal-to-noise performance. For the NIRQuest512, we measured Noise Equivalent Power (NEP) of <0.5 picoWatts at 1550 nm with 100 ms integration time. For the NIRQuest256-2.5, we measured NEP of ~25 picowatts at 2050 nm with 30 ms integration time.

March 18th 2010

Low Cost UV-NIR Spectrometers


BFi OPTiLAS, thanks to its collaboration with Ocean Optics, announce a new range of low cost spectrometers, with extended spectral range allowing covering the full UV-NIR range from 200 nm to 1050 nm, with a resolution of 2 nm.

This is available with the either of the well known USB and JAZ optical benches. A special grating has been developed to cover the full spectral range with very good efficiency.

The unique JAZ concept allows measurement in the field with a stand-alone ultra-compact unit.

January 26th 2010

LABSPHERE : Matériaux de Réflectance pour Optique

BFi OPTiLAS France distributeur exclusif des produits LABSPHERE offre une large gamme de matériaux et revêtements de réflectance diffuse de la lumière.
Pour obtenir un taux de réflexion diffus et uniforme maximal et stable dans le temps, nous proposons différents revêtements nommés Duraflect, Spectraflect, Spectralon et InfraGold fonctionnant sur une large plage de longueur d’onde de 200 à 2500nm. Chacun de ces matériaux permet d’obtenir des réflectances diffuses allant de 90 à 99% pour le Spectral
on.

Nous proposons ces matériaux et revêtements sous différentes formes et déposés sur différents substrats.
Les applications sont nombreuses : Rétro-éclairage en aéronautique, automobile et dans l’éclairage en général, Calibration d’instruments sur le terrain et en laboratoire, Cavité laser, Imagerie médicale, etc.

January 26th 2010

LABSPHERE : Analyseur d'écrans solaires UV-2000S

BFi OPTiLAS France distributeur exclusif des produits LABSPHERE introduit le nouvel analyseur UV-2000S remplaçant du célèbre UV-1000S permet de mesurer rapidement le facteur de protection solaire UVA «In Vitro».
Ce système a été conçu pour être compatible aux dernières méthodes In-vitro telles que les méthodes COLIPA UVA-PF, Boots-Star et FDA.

L’UV-2000S permet de mesurer simplement et rapidement la transmission diffuse de différents écrans solaires allant de 250 à 450nm. L’analyse «presse-bouton» permet de récupérer les résultats en moins de 5s.
Il calcule automatiquement le SPF, ratio UVA/UVB, longueur d’onde critique.
Le système intègre une sphère intégrante en Spectralon, une source Xénon, un spectromètre et une platine de positionnement précise afin de donner des mesures fiables et répétables dans le temps.

January 19th 2010

LABSPHERE : BFi OPTiLAS France devient distributeur exclusif

La société Labsphere spécialisée depuis plus de 30 ans dans l’analyse de lumière offre un large choix de systèmes à base de sphères intégrantes.

Tels que des systèmes d’analyse de lumière à base de sphères intégrantes, des sources optiques uniformes, des systèmes de test d’écrans solaires, des étalons standards, des cibles.

Principales applications pour les systèmes à sphère intégrante :
Eclairage automobile, écrans à LED, éclairage architectural, machine vision, calibration de spectroradiomètre, calibration d’instruments de laboratoires, spectroscope en réflectance, test de protection solaire, test en Textile, éclairage pour les expositions arts & Musées, éclairage pour le divertissement...

January 21st 2010

ELDIM : Solutions d'analyse 2D et angulaires en photomètrie & colorimètrie

La société française ELDIM, nouveau partenaire exclusif, conçoit et fabrique des matériels de métrologie et des composants optiques spécifiques pour les secteurs de l'optique, multimédia, aéronautique, automobile et éclairage notamment.

La gamme se compose des produits suivants :
  • Goniométrie: Caractérisation en luminance, couleur et polarisation vs angle sans aucun déplacement grâce aux optiques de Fourier : Gamme EZLite et EZ Contrast
  • Vidéophotomètrie: Caractérisation en uniformité de la luminance, couleur : Gamme ISense, Muratest et UMaster
  • Imageurs spectrales : uniformité 2D en fonction de la longueur d’onde, luminance et couleur : Gamme MSColor32 et MSColor4
  • Analyse temporel: Mesure du flicker, temps de réponse, etc... : Gamme Optiscope / FPDLite
  • Sources uniformes de calibration à base de LED et de lampes CCFL

January 22nd 2010

ELDIM : Equipement de Métrologie et Composants Optiques Spécifiques

La société française ELDIM, nouveau partenaire exclusif, conçoit et fabrique des matériels de métrologie et des composants optiques spécifiques pour les secteurs de l'optique, multimédia, aéronautique, automobile et éclairage notamment.
La gamme se compose des produits suivants :
  • Goniométrie : Caractérisation en luminance, couleur et polarisation vs angle sans aucun déplacement grâce aux optiques de Fourier (Gamme EZLite et EZ Contrast)
  • Vidéophotomètrie : Caractérisation en uniformité de la luminance, couleur (Gamme ISense, Muratest et UMaster)
  • Imageurs spectrals : uniformité 2D en fonction de la longueur d’onde, luminance et couleur (Gamme MSColor32 et MSColor4)
  • Analyse temporelle : Mesure du flicker, temps de réponse, etc... (Gamme Optiscope / FPDLite)
  • Sources uniformes de calibration à base de LED et de lampes CCFL
For further information, Please contact us
Nouveautés
NIRQuest Spectrometer Ne ...
Maya2000 Pro-VIS-NIR Spe ...
Solar Laser Systems Dist ...
Ocean Optics: Détection ...
Ocean Optics Spectromete ...
Ekspla Picosecond Tunabl ...
ELDIM: Luminancemetre Ba ...
Ocean Optics: TORUS Mini ...
Ocean Optics: Micro-Spec ...
Labpshere Introduces New ...
EKSPLA: Tunable KHz Int ...
LABSPHERE : Systèmes de ...
ELDIM : Analyseur Goniom ...
Ocean Optics: Miniature ...
Low Cost UV-NIR Spectro ...
LABSPHERE : Matériaux de ...
LABSPHERE : Analyseur d' ...
LABSPHERE : BFi OPTiLA ...
ELDIM : Solutions d'anal ...
ELDIM : Equipement de Mé ...
 QuickSearch: 
    http://www.spectroscopy-bfioptilas.fr/
    >Home